PET bottle flakes pelleting line
Raw materials: PET bottle flakes pelleting line
Raw material: hard plastic waste
Usage method:
Pelletizing Line
PET Bottle Pelletizing Line adopts traditional Relay Electrical Control. Temperature control is Advanced Digital Temperature Control Form PID Adjustment. The main engine and feeding implementation are interlock controlled. The operator panel has a heating and disconnection alarm and main aircraft operation, alarm indication, etc. Button operation. PET Bottle Pelletizing Line characteristics: 1.Treated PET bottle flakes are pelletized after washing, and moisture content is within 5%. 2.Three segments and Roots Vacuum Pump, with good exhaust effect. 3, PET Bottle Pelletizer is a Double-screw Extruder with excellent mixing properties, good self-washing, flexible modular combination characteristics. PET Bottle Pelletizing Machine does not require a complex Pre-crystallized drying system, achieving ideal PET viscosity control, low IV decline, adding suitable auxiliaries to achieve increasing adhesion.
Mode | Tssk-50 | TSSK-65 | Tssk-72 | Tssk-92 |
Screw Diameter(mm) | 50.5 | 62.4 | 71.2 | 91 |
Main Motor Power(kw) | 37 | 55 | 110 | 250 |
Capacity（kg/h） | 80-120 | 200-250 | 300-400 | 500-800 |
Lower energy consumption and higher production
Rely on a special-design control program and process monitor to achieve lower energy consumption.
Higher production is obtained under the same equipment specification, increasing output, reducing energy consumption.
Intelligent control
HMI PLC control：Ergonomic touch screen, easy operation, high stability and low maintenance cost.
Process formula memory: According to the formulation and logic of different materials to set parameters, it can easily load the saved process formula from the formula storage system, to make the process simpler.
Remote diagnosis and data transfer: Combined with Bluetooth and modules, realize remote data transfer and monitor, fast diagnosis.
Preheating: Preheat the equipment in advance according to the formula, to save labor.
High security protection: ensure the security of personnel and equipment
Emergency protection (to stop the equipment during emergency)
Limit switch
Protective cover
High-speed transmission warning (yellow painting sign)
One-stop service
Provide a complete set of solutions: factory design, equipment and auxiliary machine, fast response service system (online + underline)
Screw Feeder→Quantitative Feeder→Hydraulic filter Mesh Changer→Water Tank→Dryer→Pelletizer→Vibrating screen(Optional)→Air supply system→Silo
Extruder
It consists of a deceleration box (high torque, low noise, external cooling cycle system), 38CrMoA1 screw treated with nitride, cylinder (38CrMoAlA, nitride treatment, cylinder fan cooling, controlled by temperature control meter), and vacuum system.
Water Cooling Strand Cutting System
Water Cooling Strand Cutting System includes a Cooling Tank, strong wind drying, and a Pelletizer that cools the plastic strands from the Extruder.
＊版权所有·侵权必究＊
|
|
- Please fill out the form below to start chatting with the next available agent.